itmelona – Iksor https://iksor.net software and hardware development Thu, 13 Oct 2022 11:40:52 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 Remote Controllers https://iksor.net/remote-controllers/ Fri, 23 Sep 2022 04:33:10 +0000 https://iksor.net/?p=2330 Several remote controllers were developed for both industrial and agricultural usage.

Different communication protocols were used with wired and wireless variants of remote controllers.

]]> IOT PSU https://iksor.net/iot-psu/ Fri, 23 Sep 2022 04:32:19 +0000 https://iksor.net/?p=2328 IoT power supply provides stabilized 3V3 and 5V0 output with very low quiescent current (40 uA) from a single lithium cell, which is protected and monitored using dedicated fuel gauge.

Additionally MPPT solar charger as well as USB charger are integrated on same PCB.

]]> GSM/SubG Remote Control https://iksor.net/gsm-subg-remote-control/ Fri, 23 Sep 2022 04:31:20 +0000 https://iksor.net/?p=2326 RF remote controller can control load via both SubG (868 MHz) RF link or through GSM network in case that RF signal strength is not sufficient.

2,4 MHz Buck-Boost converter ensures wide operating voltage range.

]]> OM-7 Animal Stunner https://iksor.net/om-7-animal-stunner/ Fri, 23 Sep 2022 04:30:24 +0000 https://iksor.net/?p=2324 Animal Stunner is used to stun animals before slaughtering to avoid stress and pain.

Using dynamic high frequency and adjustable current ensures the quickest stunning minimizing animal suffering.

]]> CPU Module https://iksor.net/cpu-module/ Fri, 23 Sep 2022 04:29:10 +0000 https://iksor.net/?p=2322 CPU module is an add-on, used in several applications using different daughter-boards, which defines final termination type.

Includes SD bootloader for simple on-site firmware updating.

]]> RF-22 Communicator https://iksor.net/rf-22-communicator/ Fri, 23 Sep 2022 04:28:26 +0000 https://iksor.net/?p=2320 This module was developed as a RF replacement for a 22-wire connection between two industrial controller systems.

Developed solution has 22 I/O channels which remotelly (868 MHz) translates its inputs and outputs to another module.

]]> 6S Standalone BMS https://iksor.net/6s-standalone-bms/ Fri, 23 Sep 2022 04:27:36 +0000 https://iksor.net/?p=2318 Integrated 6S BMS for standalone operation as 24 V PbGel battery replacement.

Optionally can be equipped with MCU and CAN-BUS communication.

]]> 13S Stackable BMS https://iksor.net/13s-stackable-bms/ Fri, 23 Sep 2022 04:26:25 +0000 https://iksor.net/?p=2316 Starkable 13S BMS unit (48 V) with galvanically isolated CAN-BUS communication with master unit.

Integrated cell balancing and visual mode and operating indication.

]]> 3S BMS With Integrated PD Charging https://iksor.net/3s-bms-with-integrated-pd-charging/ Thu, 22 Sep 2022 12:48:18 +0000 https://iksor.net/?p=2314 Complete Lithium-Ion Power Delivery system with 3S LiIon cells, battery management, fuel gauge and buck-boost charger with USB-C PD support, which enables quick charging up to 20 W.

]]> 10S E-Bike BMS https://iksor.net/10s-e-bike-bms/ Thu, 22 Sep 2022 12:47:17 +0000 https://iksor.net/?p=2312 10S BMS was designed for 250 – 1000 W e-bikes and 36 V system.

Using CAN-BUS it communicates with main motor controller and dislplay and report all relevant information such as SOC, SOH and possible errors, which are also fully logged.

Optionally BMS can be equipped with BLE module to monitor status and change parameters.

]]>